NVIDIA/Mellanox MMS4C11-XM800 (980-9IAY1-00XM00) Compatible 800G OSFP224 DR4 Broadcom 3nm DSP (Sian3 | BCM83628) 1310nm 500m RHS/Flat Top PAM4 DDM MPO/MTP-12 APC SMF Optical Transceiver Module NVIDIA DPUs and SuperNICs (InfiniBand) the 400Gb/s signal is demultiplexed

the 400Gb/s signal is demultiplexed and converted back into eight 50Gb/s PAM4 electrical outputs

enabling parallel single-mode optical connectivity within QSFP-DD platforms

NADDOD O2Q56-400G-CU3FH is a passive Direct Attach Copper (DAC) cable with an OSFP-based twin-port 2x 200Gb/s connector to two 200Gb/s QSFP56s

plus an embedded PCIe switch and NVMe over Fabrics offloads

It is engineered for data center environments requiring precise Type B polarity and consistent fiber performance over a 49ft span

NVIDIA/Mellanox MMS4C11-XM800 (980-9IAY1-00XM00) Compatible 800G OSFP224 DR4 Broadcom 3nm DSP (Sian3 | BCM83628) 1310nm 500m RHS/Flat Top PAM4 DDM MPO/MTP-12 APC SMF Optical Transceiver Module NVIDIA DPUs and SuperNICs (InfiniBand) the 400Gb/s signal is demultiplexedDescription NADDOD OSFP 800G DR4 adopts an OSFP Flat Top form factor, with 4200G PAM4 on the electrical side and 4200G PAM4 on the optical side. It operates at a 1310nm single mode wavelength and achieves parallel optical transmission via a single port MPO MTP 12 APC interface, supporting single mode fiber links up to 500 m in length. This module is primarily used for high speed interconnection between TH6 series switches and ConnectX 9 (CX9) OSFP