NanoBAM XL 1900KV/3200KV Brushless Motor for Redcat Ascent-18 Buzzsaw Due to the RPM of

Due to the RPM of these motors they are not recomended for use with 3s

You will need to cut a small plastic overhanging section from the right side where the motor protrudes near the outside of the chassis on the Micro B only

Bevrolay Asunder body is is specifically designed to fit the Mofo RC Ugly Chassis V3 or V5

Stock is 30% overdrive

then assemble the inner and outer wheel halves

NanoBAM XL 1900KV/3200KV Brushless Motor for Redcat Ascent-18 Buzzsaw Due to the RPM ofThe NanoBam XL is a slightly longer motor with a larger 12mm bolt pattern motor compared to our standard NanoBam line. It is intended for heavier vehicles such as the Redcat Ascent 18 series as a replacement for the 130 or 180 sized brushed motors. Please note that if you have the newest brushed brushless model, this motor will not work as the motor mount has been updated to a 12. 5mm pattern vs an industry standard 12mm. The pinion also has been