MSD - CAN-Bus Terminator cap for use with CAN-Bus Hub. 509 in Knurl - Steel

509 in Knurl - Steel - Black Oxide - Set of 5

Battery Disconnect - Rotary Switch - Panel Mount - 175 Amps - 6-36V - Aluminum On / Off Panel - Each

Hose - AQP Socketless Hose - 4 AN - 10 ft - Rubber - Blue - Each

5 in Height - 5/16 in Hose Bar Inlet - Breather / Bracket - Aluminum - Kit

It is supplied with four

MSD - CAN-Bus Terminator cap for use with CAN-Bus Hub. 509 in Knurl - SteelMust be used with CAN Bus Hub, PN 7740 to complete circuit. Without the CAN Bus Terminator in place at the end of the CAN Bus system, signals could be distorted. These distorted signals could result in permanent or intermittent problems that include but are not limited to, improper timing, false signals, and repetitious signals. Always be sure to have the MSD Controller and the CAN Bus Terminator at the ends of the MSD CAN Bus.